Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

No brake lights

Started by Johnny2cards, May 28, 2013, 02:57:57 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hi there I have a 2.3 zetec mk1 and have not got no brake lights and was wondering if anyone could tell me what no fuse it could be or any other thing that might be wrong many thanks

Hello and  [W4]

MK 1 is fuse 20
MK 2 is fuse 15

Is the high level (centre) light also not working?

Brake light switch is a common complaint

Also check for blown bulbs and faulty wiring in tailgate gaiter may also be a problem

2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.

I had that recently on my MK2 Alhambra and it was the brake light switch issue. On the Alhmabra you get an EPC warning light come up on the dash, luckily I took the switch out and freed the spring and it corrected the fault.
Seat Alhambra 2000 Facelift 1.8 20v Turbo

Just had the same with my mkII galaxy.EPC light came on no break lights. Mine was caused by broken wire in tailgate gator blowing a fuse.

Can anyone give any more details on which particular wire is at fault? I have had a problem on mine since towing a folding camper the other week, could it be a short in the folding camper wiring that caused the fuse to blow in the Alhambra?

Have you used this trailer on the car before with no problems and is the fuse still blowing without the trailer connected.
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.

Quote from: Chrispb on February 03, 2015, 11:10:50 PM
Have you used this trailer on the car before with no problems and is the fuse still blowing without the trailer connected.

I bought another folding camper which I sold the day after and towed it for 4 hours without problems. This one is a different one and the eml came on within 10 minutes of towing it. All the lights work OK on the trailer but I'm wondering if the load is too great for the fuse.

How is the socket wired on the car?
1. Is it a factory fitted set up.
2. An after market towing relay
3. A DIY job with no relay
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.

February 04, 2015, 11:15:03 PM #8 Last Edit: February 04, 2015, 11:16:40 PM by jimmy-james
Quote from: Chrispb on February 04, 2015, 09:17:28 AM
How is the socket wired on the car?
1. Is it a factory fitted set up.
2. An after market towing relay
3. A DIY job with no relay

Its a genuine VW kit for the Sharan which plugs directly into the factory wiring with no relays. Some of the wiring is redundant as its a 13 pin setup and i do not have the additional relays etc for the additional electrics. Seems strange to me that the other trailer didn't cause any problems.