Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

Intermediate shaft stub bolt torque settings

Started by markn, October 24, 2021, 02:30:51 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down 1
User actions
October 24, 2021, 02:30:51 PM
Hi All, the stub shaft that goes into the gbox stripped, so I bought new. Just managed to get the bolt in having overcome the stub spring compression pushing out, but does anyone know what the torque setting for that hex bolt is please?  Had a good look round the site but can't find it.
October 24, 2021, 10:57:07 PM #1
Hi and welcome to the site.
A specified torque for that bolt is a bit vague, it's not listed in Haynes
The TIS manual only lists the AG5 auto box which is a similar setup and that is 25Nm or 18ib ft
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.
October 25, 2021, 12:01:58 AM #2
Cheers, hopefully that's ballpark if I can't find anything. It's not a common job so probs only in detailed manufacturers data.
User actions
Print
Go Up 1