Seat alhambra upper strut mount issues

[Bigbubba85]

I have recently changed the lower arm steering rack track rod end and upper mount bearing and rubber when its all back together it still comes up really high twice height of driver side it is completly baffling me what the issue is why still coming high it is on lowered suspension would shorter tie bars fix the issue

[johnnyroper]

Was the reason for changing those bits due to ride height or has the increased height come after the parts were fitted?

[brianh]

Are you sure you have the top mounts the right way up (the rubber donuts)? When you say high, is the gap at the top where the cap goes higher on one side than the other, or does the car sit higher on one side than the other?

[Bigbubba85]

Im pretty sure they the right way up the height is just on the one side at the cap

[Bigbubba85]

Its the height at the strut top it was high before the rack got replaced as was leaking oil and the other parts followed i replaced the strut top around a year ago settled for a bit and up again the bearing was still ok but put a new one in anyway

[Bigbubba85]

Im pretty sure they the right way up the height is just on the one side at the cap

have you got a diagram of the mount to check its right way round

[brianh]

If it works try this link
https://ford.7zap.com/en/car/140/code.1j,1.36728,2.5145,4.38197,6.29271,9.26224,11.47668,12.35745,13.32959,15.45951,16.37009,17.8113/0/2552/19497/85596/?vin=wf0gxxpssg1j55631

The longer lip should be on the bottom if that helps any?