Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

Door looms

Started by MrBone, December 28, 2019, 08:10:51 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down 1
User actions
December 28, 2019, 08:10:51 AM
Morning all
Does anyone know what gauge wiring is in the door to pillar looms. Both mine and my son's Gals have the same issues with locking and speakers, so I'm thinking of buying some cable, pin tool and crimper, and making new ones.
December 28, 2019, 09:06:20 AM #1
There are various different sizes depending on what is being powered,sorry canââ,¬â,,¢t remember off top of my head best bet is to peel a gator back and have a look.

If you are replacing the wire I would advise silicone covered as itââ,¬â,,¢s far superior for this application
December 28, 2019, 09:28:34 AM #2
Free from memory i think theres sizes between, around 20AWG to 14AWG, but its been a while now since last repair (so propably going to fix it again soon  ::) )

If you have to replace a piece of the broken wire, i like to take out the hole loom from the door, and make one of the joints inside of the door, that way you will only have one joint on each wire in the gaiter and half the risk of breaking a joint in there :)
User actions
Print
Go Up 1