Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

Interior lights

Started by Adam Boswell, December 03, 2018, 06:29:56 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Is there a sticky or something in the knowledge base about the interior lights?

I don't seem to be alone not having interior lights, my glovebox light and map light work so I have power to the circuit, indeed the fuses are all fine.

I am at the stage where I think it must be the timer control in the fuse box which leads me to believe I need a new fuse box as the timer is integrated (think that's right?) either that or bypass it somehow to just activate from the switches.

Before I start ripping the fusebox out....anyone have any ideas or knowledge that would be of use?

Anyone fixed the same issue?

Sent from my STF-L09 using Tapatalk


There's two fuses for the interior lights

Number 53 10amp
Number 55  5 amp
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.

Quote from: Chrispb on December 03, 2018, 07:37:15 PM
There's two fuses for the interior lights

Number 53 10amp
Number 55  5 amp
Cheers, so based on my fuse box map on the fusebox cover the vertical strip of small fuses are 51-62 making the green arrow 53 and the blue arrow 55 but that is 30amp in the 53 slot and 5amp in the 55 slot. Both are not blown however.

In addition to get to the fuses I unplugged the connector in the orange circle, this stopped all the interior lights from working, when plugged back in the map and glovebox light started working again.

Assume the fuses even though incorrect in slot 53 are ok given they are not blown, unless I am not looking at the right fuses?

Anyone know what the connector does?

Sent from my STF-L09 using Tapatalk


That will be main power in to that row of fuses,probably originates from battery fuse box.

Quote from: johnnyroper on December 04, 2018, 03:05:59 PM
That will be main power in to that row of fuses,probably originates from battery fuse box.
Cheers Jonny that was my thinking but though I would check

Sent from my STF-L09 using Tapatalk


Looking at the wiring diagram the 5 amp fuse has the connection with the door switches and control module, the 10 amp or 30 amp feeds the interior lamps.
Try checking number 55 fuse socket for power if you haven't done so already, think I would replace that 30 with a ten, I know it wont cure your problem but for safety's sake.
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.

Quote from: Chrispb on December 04, 2018, 04:18:53 PM
Looking at the wiring diagram the 5 amp fuse has the connection with the door switches and control module, the 10 amp or 30 amp feeds the interior lamps.
Try checking number 55 fuse socket for power if you haven't done so already, think I would replace that 30 with a ten, I know it wont cure your problem but for safety's sake.
Will be swapping the 30 with a 10 when I can find my box of fuses....and find my multi meter! Cheers chris

Sent from my STF-L09 using Tapatalk