Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

Mk1 and Mk2 driveshafts

Started by Mihkel Ader, September 24, 2018, 05:41:09 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down 1
User actions
September 24, 2018, 05:41:09 PM
I have a question, does the 01-10 Galaxy/Sharan nearside axle with the bearing fit into the Mk1 Car in any way? Old shaft is done and its easier to find one for the mk2 than the mk1?
September 24, 2018, 10:50:42 PM #1
They are different - the mk2 uses 6 bolts to couple to the gearbox, the mk1 stub sticks straight into the gearbox on the longer shaft. The short one might be interchangable, not sure never tried it.

Given your in Estonia it might help to specify if you mean the short driveshaft or the long one, as I suspect your definition of nearside is the opposite of the UK one?
September 25, 2018, 02:16:01 PM #2
I meant the long one, with the bearing inside it. I cant seem to find any place that supplies the right one as new, expect original part which was over 300 euros something
User actions
Print
Go Up 1