Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

2005 1.9tdi ford gaalaxy

Started by lawrence, September 22, 2016, 09:27:53 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

HI ,
I need some advice regarding noise when inputting left and right turns and also while engine is idling , noise seems to be  coming from steering pump. On further investigation it appeared to me that the tensioner for the drive belt was moving excessively indicating
a weak tensioner spring ,fitted new tensioner but no improvement with the same amount of movement on new tensioner.

Next I fitted a second hand steering pump ,also with no improvement .

The noise goes away as I bring up the revs.

I have checked the other pulleys for play ,alternator and A/C the seem fine.

Could the cluth pulley on alternator be causing this problem.

thanks for any help

Sounds VERY much like the alternator clutch. There is a how-to in the ref library for checking it as it should freewheel in one direction and I would suspect yours won't!
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
17 Volkswagen Touareg 3.0 V6 Diesel in Slate Blue
262Bhp AWD and Factory fresh...for now!
58 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)
LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)

Without doubt it's the overrunning alternator pulley,mine had exact same problem when I bought it the pulley was seize for solid. I also had vibration through steering when going lock to lock at idle.