Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

VDCS Parking Sensor Module

Started by Scuba_do, January 24, 2014, 12:43:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Still having trouble with the parking sensors. Can someone tell me where the Parking Sensor module is located in VDCS? Thanks.

iirc address 76 park assist
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.

Thanks very much. For some reason, the autoscan won't work but individual module selection is OK.

Auto scan only works if you have a registered version.
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.

Yes the Autoscan gets part way through then says that a registered version is required. I'm sure it worked on an older version though.

You were right, it was module 76. Just like the thing, managed to get a replacement control module off E-bay for a reasonable price. Sensors still didn't work and I thought it must be faulty but it seems that one of the actual sensors is dud. Swapped it round with another one to check that it wasn't a wiring fault and the fault report moved with it.