Welcome to BigCarClub!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

Ford Galaxy Mk3 - Replacing Stoplamp and Indicator bulbs

Started by Chrispb, February 03, 2013, 01:10:40 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Replacing stoplamp and indicator bulbs requires removal of the rear lamp cluster.
Pull out left or right hand access panel (left hand shown) then unscrew the two large wing nuts (pic 3)

[attachimg=1]

Slide cluster from body enough to detach wiring connector, then remove the single screw and remove bulb holder.

[attachimg=2]

Replace bulbs as necessary.

[attachimg=3]
[attachimg=4]

When refitting the cluster make sure the guide channel in the cluster slides on to the guide clip on the body

[attachimg=5]


2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2009 Kia Sedona GS In Black 2.9CRDI 183PS. 5 Speed Manual Wheelchair accessible vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.