Welcome to BigCarClub!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

Ford S-Max - Remote Key Fob Programming Instructions

Started by Mirez, July 20, 2014, 12:27:15 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

1. Fasten the safety belts and close all doors to make sure that conflicting chimes do not sound during programming.
2. Turn the ignition switch from position I to position II four times within six seconds.
3. Turn the ignition switch to position I. An audible chime will be heard to indicate that learning mode is enabled.
4. Press and hold one of the buttons on the remote transmitter until a chime sounds. This indicates the remote transmitter code has been successfully received.
5. Repeat step 4, within 10 seconds, for any other transmitters you have.
6. Wait 10 seconds or turn the ignition switch to position II to exit learning mode.
7. Test all the programmed remote transmitters, by activating and deactivating the locking/unlocking functions.
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
13 Porsche Cayenne 3.0 V6 Diesel in Umber Metallic
262Bhp AWD and Factory fresh...for now!
58 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)
LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)