Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

DVD monitors

Started by skywalker070369, August 13, 2013, 07:51:24 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down 1
User actions
August 13, 2013, 07:51:24 AM
Hi there,I just wondered if anyone can help? I have a 03 1.9 tdi mk2 Galaxy and I'm having problems with the headrest monitors.Does anybody know what fuses powers the rear DVD unit please.
Thanks for your time in advance. :)
August 13, 2013, 09:10:05 AM #1
What's the problem with it?

The rear system is fed from F10 or F32 (Depending on year) but also from the head unit.
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
17 Volkswagen Touareg 3.0 V6 Diesel in Slate Blue
262Bhp AWD and Factory fresh...for now!
58 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)
LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)
August 13, 2013, 04:16:27 PM #2
Thanks for your response,I can't get them to work at all.There were working ok but the left side went off now both aren't working.I can't unload the DVD either but the aux output is working ok as it is charging my phone.
Thanks for your time.

Chris
August 13, 2013, 05:18:37 PM #3
The 12V socket is from the same feed so if it's working then your problem isn't the supply. You could check the radio is giving it 12V on the switched side but the RSE controller can be a fiddly old beast.

Try disconnecting the left monitor (Blue multiplug under the seat) - cycling the ignition and then attempt to fire it up. It will shut the system down if either monitor develops a fault.
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
17 Volkswagen Touareg 3.0 V6 Diesel in Slate Blue
262Bhp AWD and Factory fresh...for now!
58 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)
LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)
August 14, 2013, 08:45:33 AM #4
Thanks very much for that information,It seems to be sorted as I didn't know the radio had to be on  ::) and I didn't realist you could switch from one screen to another!would you happen to know we're I could get a instruction manual for the operation from?
My only problem is I un clipped the yellow passengers side airbag loom and now it's says there is a airbag fault.
Once again many thanks for your help.

Chris
August 14, 2013, 10:40:05 AM #5
You shouldn't disconnect any part of the airbag system unless  the battery has been disconnected for about 20 mins.
You will now need VCDS/Vagcom to clear the airbag code
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.
August 14, 2013, 01:43:07 PM #6
Cheers for that,I appreciate your offer but I'm on holiday in Norfolk at the moment.Thanks all the same
User actions
Print
Go Up 1