Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

missfire judder

Started by Alan Vallance, November 22, 2017, 05:33:04 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Hi there my 53 ford galaxy 1.9 tdi starts ok and runs fine for the first 5 to 10 mins then starts to judder as though its misfiring you can here this when stood idling engine sounds rough. Turn it off and leave for 5 mins then she is ok for the rest of the day thought at first might be faulty injector or injector electrical rail but when the garage plugged the laptop in which worked before now they can not get into the ecu to get fault codes, help is much appreciated.

Injector rail is certainly a contender!

The Galaxy isn't a 'difficult' car to read, they nearly always work fine so if its not connecting then check the obvious (fuses, connector etc) and check the reader is OK on another K-Line car. If it is then its worth checking the ECU connectors as they can corrode in rare cases.
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
17 Volkswagen Touareg 3.0 V6 Diesel in Slate Blue
262Bhp AWD and Factory fresh...for now!
58 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)
LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)

all fuses are ok and test equipment works fine on other cars as have been there when used on mine and other cars

how easy are these injector rails to replace and the best place to buy a new one

Injector loom fairly easy to change just have to remove rocker cover. Best bet for replacement is VW dealer I would say, if memory serves correct they are about Ã,£60

Odd you canââ,¬â,,¢t access ECU with scan tool,like Mirez suggested have a check of ECU plugs for water ingress/corrosion

 Thank you Mirez have changed the wiring loom today for the injector rail and now runs smooth  :) :) :)