Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

Fitting universal remote locking, MK1

Started by gearboy, June 11, 2016, 04:43:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down 1
User actions
June 11, 2016, 04:43:45 PM
Hey all!

I have tried searching but couldn't find any concrete, so here goes.
I am in the process of installing a universal remote lock (from ebay), and I wanted to connect it to the tailgate lock switch lock/unlock signals.
It seems like a good place to put the unit in the side-compartment where the wiring to the tailgate is connected.

The picture is from the compartment and the white connector seems to contain the signals from the lock, and the red/white cable in the black connector beside it has 12V.

Does anyone have a wiring diagram, identifying the cables I need? :)

So far, I think the lock+unlock wires are the yellow/red and yellow/black visible bottom right.
User actions
Print
Go Up 1