rear washer no water

[julieade]

hi there anyone know why no water is coming out washers at rear of my mk2 galaxy the pumps going the wipers going but no water i have took back boot cover off took pipe of motor but no water comes out help please thankyou ade

[Chrispb]

Have you checked the passenger footwell for wet carpet, there is a joint in the pipe under the carpet that can become disconnected, see Here

[julieade]

thankyou will check that today

[julieade]

thankyou will check that today

just put my hand under the plastic moulding and the pipe has come appart will take plastic off later thanks

[julieade]

pipe joined and glued now got rear washers yipppppeeeee thankyou chris pb

[Etihad84]

lucky you haha, I have the same problem but I checked my pipe and it's fine I get a puddle of water running from under the passenger wheel so mine must be disconnected at the bottle although I can't get the wheel arch liner off to get at it as the screws are all weathered :-(

[Chrispb]

It also can be the pump leaking, have just changed one with the same problem.
Those screws should knock around with a small chisel once started they should come out easily.

[Jahukka]

I just fixed footwell joint and changed new pump. Now I got wet tailgate.. 
I found this in other topic: http://www.ebay.co.uk/itm/SKODA-VW-CARS-REAR-BACK-SCREEN-NOZZLE-WASHER-JET-3B9955985A-original-part-/121176463602?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c36ae18f2  Is this part moving with the wiper arm or not? I got something jammed in there . That's why tiny pipe is broken inside the wiper arm axle. 
So I need that new nozzle (founded) and that pipe thing trought motor assembly. Any ideas?

[insanitybeard]

That washer jet fixes inside the rear wiper motor spindle- the design of the rear wiper motor means that the washer fluid is fed through the motor spindle itself, so yes, the jet rotates with the spindle and wiper arm when the wiper is switched on. Are you saying your old jet has snapped off inside the spindle?

[Jahukka]

 No, I broke it 
After I Discovered that a small tube is broken. And I tried to take the final piece of inside of the shaft.
It is about 3,3mm thick brass tube which is broken.
I am looking something like this...
http://www.ebay.co.uk/itm/Waschwasserduse-Scheibenreinigung-VW-FEBI-BILSTEIN-22294-/151512056727?pt=DE_Autoteile&hash=item2346d28397
will that fit?

[Jahukka]

  I found it!!!! I need rep set 7M3998711



and here is some pics . sadly I can't understand any russian lanquage, but I understand what I see 
http://www.pro-ford-galaxy.ru/dvornik.php

[insanitybeard]

Good job! I was incorrect earlier when I said that the jet rotates with the wiper spindle, the spindle is hollow to allow the separate washer fluid delivery tube to pass through it, so that when the spindle rotates the water delivery tube stays static. Anyway, it's good information to know you can get a repair kit instead of having to replace the complete wiper motor!

[Chrispb]

Englishy version
[attachimg=1]