Welcome to BigCarClub!

Site Notification:

BigCarClub is now closed to registrations. Whilst it remains available online, the site is now an archive only and will eventually expire.
Thank you to all our members who contributed over the years!

Not logged in!

Hey there, welcome to BigCarClub!
You don't need to be logged in to view the forum but the experience will be so much better if you are! Users can login or if you don't have an account already, you can create one for free by clicking the Register link in the top right corner of this page.

Advert:

Wiper linkage install

Started by Mihkel Ader, February 25, 2017, 10:23:10 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down 1
User actions
February 25, 2017, 10:23:10 AM
Does anyone know how to get the wiper linkage in a mk1 sharan?
February 25, 2017, 10:42:32 AM #1
Not sure what your doing here?
1. Do you need to dismantle the linkage, is it seized up
2. Are you just refitting the assembly to the car.
3. some other problem.
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.
February 25, 2017, 10:43:35 AM #2
I am trying to refit it but when i put one side in the other doesnt have space to put it in
February 25, 2017, 10:54:20 AM #3
So is it the original linkage or is it from a different vehicle.
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2023 VW Transporter T6.1 SE In Silver 2.9TDI 150PS. 7 Speed DSG Wheelchair accessible day vehicle.


With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me. All for a pint of Strongbow.
February 25, 2017, 10:55:34 AM #4
It is the original linage, i took it out because i was replacing the heater core and i cantget it back on
February 25, 2017, 11:15:30 AM #5
It's not something like the linkage has moved on motor making more difficult to get back in?
I can't see how it won't line up as it came out of the car ok?
February 25, 2017, 11:19:44 AM #6
It was a really tight fit to get it out and no it hasnt moved
February 25, 2017, 12:44:32 PM #7
when you removed it you say it was really tight to get out,don't suppose you could have bent it could you?

I am not familiar with mark 1 and can't really make out picture on phone but is it possible to loosely fit one side and then be able to manoeuvre the other side in?
User actions
Print
Go Up 1