Intermidiate drive shaft carrier bracket 09B409905d

[Tikka]

Hi I'm having problems getting hold of a intermediate drive shaft carrier bracket. Recently I ordered all 3 shafts for my galaxy mk2 tdi 1.9tdi 85khw and the middle shaft fits but is held on to the engine with a bracket which mas to be purchased separate, only think this bracket cost Ã,£62 from ford and that's without the 5 bolts that hold it up. Can anyone supply cheaper need this part asap and I'm in Mansfield. 

[daddyfixit]

mine is a year 2000, anu engine code 90 hp ;
my offside driveshaft was in something that looked like the Eiffel tower !!!  when I got new stub nd intermediate shaft, j&r driveshafts advised me to get the support bracket from a scrapyard---it came off an audi but bolted straight on.

[Tikka]

yes the effiel tower is a cone shape original part as the aftermarket ones are a little different. so you took it off a audi>? that's interesting. could you remember what type? its going to cost me loads from fords

[mushdy]

Daddyfixit, how have you found the intermediate driveshaft from JR? I've fitted new drive shafts from them about a year ago and they've been very good but I have some play in the intermediate shaft and was thinking of replacing mine with a JR component. They have them on the bay for about 30 quid...did you have to buy any other components apart from the Eiffel tower thing!

[daddyfixit]

sorry I don't know which audi as scrapyard took it off-----I rang up describing a bracket that holds driveshaft on a 6 speeder and its bolted to the block.
   mines done 170 k and inner shaft was squeaking/rusty and had freeplay in it---that's why I went for the stub and shaft kit from j and r.
   its been to cornwall and back, plus everyday running around.  I did recheck it before my 03.30 a.m drive down south and all was well.