Text only | Text with Images

Big Car Club - MPV and SUV Forums

MPV Section - Forums for Multi Purpose Vehicles: => Ford Galaxy Owners Forum - Mk3 Mk4 / Ford S-Max Mk1 Mk2 (2006-Present) => Topic started by: Big Skud on October 28, 2022, 11:40:35 AM

Title: Overriding Alternator Pulley
Post by: Big Skud on October 28, 2022, 11:40:35 AM
Could anyone advise on where to source one at a reasonable price as the one on my Galaxy Zetec TDCI is rattling on idle and how hard is it to replace?  TIA
Title: Re: Overriding Alternator Pulley
Post by: johnnyroper on October 29, 2022, 12:03:29 AM
When I replaced one I sourced from the fleabay, actually very easy to replace them. Torx bit in to shaft and there is a special tool to crack pulley off although I used grips as my pulley was seized. The tool is only cheap to buy though.
What engine have you got as I think I might still have a spare for a 1.9pd Bosch alternator.
Title: Re: Overriding Alternator Pulley
Post by: SirDavidAlhambra on October 29, 2022, 05:29:17 PM
 :nothing:
Title: Re: Overriding Alternator Pulley
Post by: regw on November 14, 2022, 03:50:25 AM
I only realised mine was bad when I got belt slip squeal when turning the wheel on tick over
when parking and thought the aux belt was slipping
( well it was, but not because its was worn)

Here's the vid

https://vimeo.com/277821051
Text only | Text with Images