Print Page - Intermediate shaft stub bolt torque settings

Title: Intermediate shaft stub bolt torque settings
Post by: markn on October 24, 2021, 02:30:51 PM

Hi All, the stub shaft that goes into the gbox stripped, so I bought new. Just managed to get the bolt in having overcome the stub spring compression pushing out, but does anyone know what the torque setting for that hex bolt is please? Had a good look round the site but can't find it.

Title: Re: Intermediate shaft stub bolt torque settings
Post by: Chrispb on October 24, 2021, 10:57:07 PM

Hi and welcome to the site.
A specified torque for that bolt is a bit vague, it's not listed in Haynes
The TIS manual only lists the AG5 auto box which is a similar setup and that is 25Nm or 18ib ft

Title: Re: Intermediate shaft stub bolt torque settings
Post by: markn on October 25, 2021, 12:01:58 AM

Cheers, hopefully that's ballpark if I can't find anything. It's not a common job so probs only in detailed manufacturers data.

Big Car Club - MPV and SUV Forums

MPV Section - Forums for Multi Purpose Vehicles: => Ford Galaxy Forum - Mk1 / Mk2 inc. VW Sharan and SEAT Alhambra (1995-2006) => Topic started by: markn on October 24, 2021, 02:30:51 PM