Text only | Text with Images

Big Car Club - MPV and SUV Forums

MPV Section - Forums for Multi Purpose Vehicles: => Ford Galaxy Owners Forum - Mk3 Mk4 / Ford S-Max Mk1 Mk2 (2006-Present) => Topic started by: Eddy Dar on April 29, 2019, 11:27:57 AM

Title: Galaxy 2.0 tdci 56 plate leaking egr coolant pipe fitting
Post by: Eddy Dar on April 29, 2019, 11:27:57 AM
Hi,

Just wondering if anyone has come across this problem before.

The EGR cooler pipe with the funny clip doesn't seem to be sealing properly. Is there a rubber seal missing ?

How easy is it to change, the pipe on the egr is easy enough, its the pipe on the bulkhead looks tricky.
Title: Re: Galaxy 2.0 tdci 56 plate leaking egr coolant pipe fitting
Post by: johnnyroper on April 30, 2019, 10:36:15 PM
If itââ,¬â,,¢s is the steel sort of v shaped band clamp then not typically a seal on those it seals by the clip holding the mating faces tight together
Title: Re: Galaxy 2.0 tdci 56 plate leaking egr coolant pipe fitting
Post by: Eddy Dar on May 02, 2019, 11:23:03 AM
Hi,

Yes I need to replace the pipe. How do i remove the pipe at the bulkhead end.
Title: Re: Galaxy 2.0 tdci 56 plate leaking egr coolant pipe fitting
Post by: SirDavidAlhambra on June 08, 2019, 10:10:16 AM
I donââ,¬â,,¢t really know much about these EGR devices. Why do they need cooling?
Title: Re: Galaxy 2.0 tdci 56 plate leaking egr coolant pipe fitting
Post by: Eddy Dar on June 10, 2019, 10:34:33 AM
FIXED ! FIXED !

It was a rubber o ring that was missing on the inside of the pipe that fits onto the egr
Text only | Text with Images