Text only | Text with Images

Big Car Club - MPV and SUV Forums

MPV Section - Forums for Multi Purpose Vehicles: => Ford Galaxy Owners Forum - Mk3 Mk4 / Ford S-Max Mk1 Mk2 (2006-Present) => Topic started by: ksforeman on April 08, 2019, 02:00:27 PM

Title: Fitting middle row Ashtray socket
Post by: ksforeman on April 08, 2019, 02:00:27 PM
Hi,
I've got a 2011 Titanium and would like to replace the 2nd row ashtray with one that has a 12v socket. I've managed to find one and ordered it, but wondered if the wiring is likely to be already in place to allow me to connect it up. If so, is it an easy job ?

Thanks

Kevin
Title: Re: Fitting middle row Ashtray socket
Post by: Mirez on April 08, 2019, 06:21:16 PM
There is a high chance the wiring will already be there since yours is a Titanium spec. If its not then its only 2 wires (3 if you get one that's illuminated) just make sure you run it from a circuit that can supply the load and through a suitable in-line fuse to protect it all.
Title: Re: Fitting middle row Ashtray socket
Post by: ksforeman on April 08, 2019, 08:03:04 PM
Looks like I'll have to remove the console to get a proper look at the wiring !

Kevin
Text only | Text with Images