Replacing stoplamp and indicator bulbs requires removal of the rear lamp cluster.
Pull out left or right hand access panel (left hand shown) then unscrew the two large wing nuts (pic 3)
[attachimg=1]
Slide cluster from body enough to detach wiring connector, then remove the single screw and remove bulb holder.
[attachimg=2]
Replace bulbs as necessary.
[attachimg=3]
[attachimg=4]
When refitting the cluster make sure the guide channel in the cluster slides on to the guide clip on the body
[attachimg=5]
Quote from: BigCarClub Reference LibraryQuestion? Something not quite make sense?
Posts in the reference library are locked but you can start a new topic on the subject by clicking here (https://www.bigcarclub.com/ford-galaxy-vw-sharan-seat-alhambra/?action=post)