Finally replaced the drivers door loom after the drivers window controls and drivers central locking stopped working
Since doing so the one shot passengers window will not work
The window controls work perfectly from both driver and passenger side
The drivers one shot works fine have tried the reset procedure from as described in the owners manual
ie lock with key unlock with key and then lock and hold but still nothing
Also tried close then close and hold and down and down and hold
So am a bit stumped now
The one shot worked fine prior to the loom change for both Windows
Sent from my D6603 using Tapatalk
Have you tried resetting it by holding in closed position after closing for a few seconds?
Quote from: johnnyroper on March 23, 2017, 03:45:29 PM
Have you tried resetting it by holding in closed position after closing for a few seconds?
Yes tried that as well
Sent from my D6603 using Tapatalk
Have a check of the plug on b post and make sure the smallplugs are all firmly in place,when I had mine apart one of the small blocks within the plug had pushed back slightly giving a poor connection.
Does it use a separate feed thought I was just the same wire as the normal window control
As I said the window works fine just not the one shot
Sent from my D6603 using Tapatalk
I don't really know but when my loom was breaking up one of the problems I noticed was window would work but not the one shot feature. Whether that was coincidence I don't know as it has been fine since repairing the loom so thought worth you having a look.
I will live with it if need be as least I can lock my door and open the window
While your on the speaker has 2 set of connections does it mater which you connect too
Sent from my D6603 using Tapatalk
If memory serves correctly one is for the door speaker and the other is piggy backed from that which goes to the tweeter on dash,so it shouldn't matter which way round they plug
Quote from: johnnyroper on March 23, 2017, 07:57:31 PM
If memory serves correctly one is for the door speaker and the other is piggy backed from that which goes to the tweeter on dash,so it shouldn't matter which way round they plug
Thought it was to link another speaker in although I have the dash tweeters but must have a direct feed from head unit
So looks like speaker definitely goosed
Cheers for the help
Slowly working through my little issues never know I may even find the earth that is causing my towbar indicators to not work
Sent from my D6603 using Tapatalk