Hi all,
I'm retro fitting rear parking sensors & module to my 2010 galaxy (2006-2010 model).
I've fitted the rear sensors & module fine, it's recognised by forscan but I can't find where the wire is for the rear speaker! And I'm not confident I have seen the correct wiring diagrams to splice into the wiring from the module.
Can anyone advise where the wire is or post a pic?
Thanks
Chris
Pin A2 (Blue/Green) and A10 (Brown/Blue) on C4MP01A are the rear speaker's connections.
Thanks Mirez, really appreciate your reply.
Do you know where the speaker should be fitted before I splice a new connection by any chance?
Annoyingly its under the headlining in the hump towards the rear (behind the drivers side D panel on the S-max). You need to remove both D pillar trims and then you can lower it enough to get access.
Sorry for the late reply.
Thanks again Mirez, that does sound like a faff, reckon I will splice it in haha.
Hope you have a good New year :)
Cheers Chris, it can't be any worse then 2016 was for me!
Have a great one yourself!
Anyone know the location of the rear pdc buzzer on a 2008 galaxy.
Apparently; it's 2 wires, brown with blue stripe and blue with green stripe, well they don't appear to be running into the headlining on mine, so I'm not sure where my faulty buzzer is.
Anyone, know the whereabouts?