Tried to connect up today
will not read ports
spent 2hrs with a computer programmer on it
still no go
any sugestions? polite ones of course
wot you really needed was a mirez or a chrisby. ;)
who will be along shortly no doubt for the best advice for you.
Hi Tony
Have you just installed VCDS on your laptop (new installation) or has it been used previously on another car or it just this car that it won't connect to.
new ebay cable for KKL vag com for 409-1
new download on computer vcdslite
only tried on galaxy
You need to make sure Vagcom is using the same COM port, when you do the test in the options screen vagcom saves to COM port 1 to 4 you then need to look in device manager to make sure they match, quite often device manager will save to a higher COM port number.
So what ever number vagcom saved (1,2,3,or 4 alter device manager accordingly.
Does the light illuminate on the cable plug when you attach it to the socket.
yes red light on plug with computer or car connected.
it is a usb connection,LITE only shows com port 1 2 3or 4
no usb port.
says to contact dealer.
computerman got system to pretend it was port 3
still nogo
tried on car with ignition on / off, no go
will not go past test system
If it won't pass test then it's not configured correctly, on your laptop go to control panel double click on system then look for the hardware tab then click on device manager plug your lead into laptop now look down the list you should find ports(COM & LPT) double click on it, it should say USB serial port COM ? this number must match the one on the VCDS lite options screen.
Lastly double click USB serial port COM ? to open serial port properties, click the port settings tab then click advanced, look for latency timer this is normally set to 16 reduce ths to 2 and if your com port is wrong you can change it on the top line then click OK you should then be able to test in the options screen.
If you do this not connected to the car the port test should say, port status OK interface not found.
When connected to the car the port test should say port status OK interface found.
That should be it
If you still have problems after this I'm sure Mirez will assist as I will be away now on Hols
thanks enjoy hols.
I followed notes
tried changing port
test says port does not exist
no interface
tried connected to car
No different
What OS you using? XP, VISTA or 7?
using 7
64 bit system
Ok:
Start > Control Panel > System > Device Manager > Ports
You should have "USB Serial Port (COM XX)" there - whats it say?
usb serial ch340 (com1)
in port settings
device ports(com&lpt)
Man wch.cn
location port_#0002hub_#0004
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Ok so in VCDS you need to select COM1 as the communications port. The driver thing you should try and fix though first as you shouldn't have that - see if you can find a usb to serial driver elsewhere (try a generic FTDI version)
using latest ftdi download
test still says port does not exist
did another download
com 1 ok
no interface
making progress!
finally got in
ignition on
started to read
will leave it tonight
and explore tomorrow
thanks for help
blue metal
Good work ;)
basic problem was drivers
finally got a 64bit driver
that worked