Big Car Club - MPV and SUV Forums
MPV Section - Forums for Multi Purpose Vehicles: => Ford Galaxy Owners Forum - Mk3 Mk4 / Ford S-Max Mk1 Mk2 (2006-Present) => Topic started by: ga73 on July 19, 2014, 09:54:10 PM
Hi all,
well had the Galaxy near 3 weeks now and really do like how comfortable it is but i have a few issues that im hoping you gents (and ladies?) can enlighten me on... the car when it hits around 2000 rpm really moves but up to that point its ... sluggish to say the least, ive bought an ELM327 modified lead and getting a few fault codes, as shown from the log below...
===PCM DTC P02E2:00-A8===
Code: P02E2 - Diesel Intake Air Flow Control Circuit Low
Status:
- DTC Maturing - Intermittent at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Powertrain Control Module
===END PCM DTC P02E2:00-A8===
===PCM DTC P003A:17-2F===
Code: P003A - Turbocharger/Supercharger Boost Control A Position Exceeded Learning Limit
Additional Fault Symptom:
- Circuit Voltage Above Threshold
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===END PCM DTC P003A:17-2F===
===PCM DTC P2127:00-28===
Code: P2127 - Throttle/Pedal Position Sensor/Switch E Circuit Low Input
Status:
- DTC Maturing - Intermittent at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===END PCM DTC P2127:00-28===
===PCM DTC P060D:00-28===
Code: P060D - Internal Control Module Accelerator Pedal Position Performance
Status:
- DTC Maturing - Intermittent at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===END PCM DTC P060D:00-28===
I've already blocked the egr valve (the codes were there before i did so i know its not because of this) but the main one i'd like to get sorted is the P0003A fault code, can anyone had this or any others and can give me some pointers on what the problem COULD be.....
Thanks Chaps...
Gary
Hi Gary, did you manage to resolve throttle position sensor issue, if do could you share please? Thanks