Big Car Club - MPV and SUV Forums
MPV Section - Forums for Multi Purpose Vehicles: => Ford Galaxy Forum - Mk1 / Mk2 inc. VW Sharan and SEAT Alhambra (1995-2006) => Topic started by: julieade on July 05, 2014, 12:50:04 PM
you got any pics of the breather pipes for turbo to check for leaks thanks
I don't have any pics of just the air hoses but most of them do appear in other photo's some are visible by looking under the bonnet and removing the pull of cover.
[attachimg=1]
[attachimg=2]
is it possible to remove and replace the braided oil pipe on turbo with turbo still on car . as mine seems to be leaking
Based on what Chris has previously stated then yes in answer to your question, the braided pipe is the oil return and should be removable with the turbo still fitted (it's the oil feed pipe that is more tricky). There is a gasket on the return pipe- number 7 on this (http://eucatparts.com/?action=cat_ford_part&s_id_part=24858&s_id_model=99) parts diagram (which is for the variable geometry turbo which I assume yours has, unless it's a 90ps TDI), it may just be the gasket leaking.
Correct the drain pipe is easily removed a quarter drive torx set is ideal for the top end and a 22mm spanner the other.