Big Car Club - MPV and SUV Forums
MPV Section - Forums for Multi Purpose Vehicles: => Ford Galaxy Forum - Mk1 / Mk2 inc. VW Sharan and SEAT Alhambra (1995-2006) => Topic started by: archerymarc on April 11, 2014, 08:18:46 PM
Hi and can any one help me with this little problem
I have a ford radio rds 6000 which I have fitted in my galaxy 1.9tdi,my only problem is when its off and no keys in ignition it looses the code, hence i have to put it in every time i use the radio and all works fine. with regard's :-X the power leads etc, they are as follows. yellow,black,red orange,brown,black,blue and are all connected to car radio loom except the brown one which i have no idea where it goes, would this wire cause the radio not to remember code !!
Hi Mark,
Pin 1 of the 'power' connector [that isn't for the speakers] is the constant 12v supply. If this is not connected, then you will get the behaviour you are seeing.
I don't know if this is the brown wire you write about, but seems likely.
Pictures of the wiring would help.
Graeme