Text only | Text with Images

Big Car Club - MPV and SUV Forums

MPV Section - Forums for Multi Purpose Vehicles: => Ford Galaxy Forum - Mk1 / Mk2 inc. VW Sharan and SEAT Alhambra (1995-2006) => Topic started by: nkswinburne on March 18, 2014, 12:19:44 AM

Title: Drivers door wire loom connector
Post by: nkswinburne on March 18, 2014, 12:19:44 AM
Hi was wondering if one of you nice people had a diagram for drivers door loom connecter. The one on the galaxy I have has been cut off. The car is a 2003 1.9 tdi ghia. Hope someone can help.
Title: Re: Drivers door wire loom connector
Post by: Chrispb on March 18, 2014, 01:18:05 AM
Is this the one[attachimg=1]
Title: Re: Drivers door wire loom connector
Post by: nkswinburne on March 18, 2014, 01:37:10 AM
Chris you are a star that's exactly what I was looking for. Thank you very much.
Title: Re: Drivers door wire loom connector
Post by: timmy on May 01, 2014, 09:49:29 PM
Hello i was just wondering could any on help me on how to remove wire loom connector from pillar on drivers side. 
Title: Re: Drivers door wire loom connector
Post by: Mirez on May 01, 2014, 10:56:53 PM
Open the door fully, rotate the castelated ring around the connector counter clockwise. When it stops rotating the connector will pull apart
Text only | Text with Images