Big Car Club - MPV and SUV Forums
MPV Section - Forums for Multi Purpose Vehicles: => Ford Galaxy Forum - Mk1 / Mk2 inc. VW Sharan and SEAT Alhambra (1995-2006) => Topic started by: ade03 on November 25, 2013, 02:37:23 PM
well we have changed the turbo boost valve and all the pipes turbo checks out ok so what the hell is it its just drops off doest do it all the time i have had enough and it has cost me a fortune :-[
Have you changed the pipe from the manifold to the engine ECU behind instrument cluster, there is also a 2 inch peice of pipe inside the ECU
all done and checked
So are you getting the same fault code?
You best collect some live data using measuring blocks 003, 010 011 this will give us a better idea what's going on.
See guide below
https://www.fordmpv.com/smf2/ford-galaxy-reference-library/galaxy-tdi-using-vcdsvag-com-to-diagnose-faults/
that's the problem is not putting up a fault code now and spoke to my mechanic there are no pipes going into the dash mine is the inport one or made in mexico so were stuck really
No fault codes sounds more like a MAF fault as they don't generally leave a code.
Is it a genuine replacement? as the cheapy ebay ones tend to give more problems than the original.
So where is your engine ECU mounted?
Could you post a piccy of your engine bay?
yes maf was will do tomorrow if thats ok